What Should Pay Attention to in the Operation of High-Speed 5-Axis Machining Center?

 High-speed 5-axis machining center is an advanced processing equipment, with high precision, sound speed and high efficiency characteristics. It is usually used for processing complex and difficult parts, such as aerospace, medical equipment, automotive parts, etc. When operating a high-speed 5-axis machining center, special attention needs to be paid to the following points:

1. Familiar with the structure and principle of the equipment: the operator needs to be familiar with the structure and working principle of the high-speed 5-axis machining center, understand the name of each axis, the range of motion and restrictions, and master the control system and programming method of the machining center. Only with a deep understanding of the structure and principle of the equipment can we correctly operate and use the high-speed 5-axis machining center for processing.

2. Strictly follow the operating procedures: the operator should strictly follow the operating procedures, including wearing personal protective equipment, avoid body parts close to the moving parts, avoid strong light exposure, etc. In addition, safety devices such as safety doors, warning lights and emergency stop buttons need to be checked regularly to ensure that they are in good working condition.

3. Equipment inspection and maintenance: before use, it is necessary to maintain and check the equipment. First, check whether the tool is worn, and if it is worn, it needs to be replaced. Secondly, check whether the fixture is stable and firm. Clean the equipment to prevent dust and foreign matter from entering the equipment. At the same time, it is also necessary to carry out real-time monitoring of the equipment during the processing process to discover and deal with problems in time.

4. Material preparation and processing: before 5-axis processing, it is necessary to prepare the required materials and ensure the quality and accuracy of the materials. At the same time, in order to avoid temperature changes affecting the processing, the material should be placed in a constant temperature environment. After the processing is completed, it is also necessary to process the workpiece, including cleaning, inspection and maintenance.

5. Safety control: the operator needs to strictly control the safety risks in the processing process, such as the cutting and cutting methods, the length and diameter of the cutting county, and the setting of cutting parameters. In the processing process, it is also necessary to pay attention to observe the processing situation, adjust the cutting parameters and tool status in time, and avoid collision or over-cutting errors.

6. Programming and setting: the operator needs to be familiar with the programming language and programming method of the high-speed 5-axis machining center, and can perform the correct programming and setting according to the processing needs. In the programming process, it is necessary to pay attention to the planning of the tool path, the setting of cutting parameters, the distribution of machining allowance and other issues to ensure the stability and accuracy of the machining process.

7. Training and experience accumulation: operators need to go through professional training and practice, practice the accumulation of experience, and constantly improve their skill level and operational experience. Through continuous learning and practice, operators can better master the operation skills and maintenance methods of high-speed 5-axis machining centers, and improve the utilization rate and service life of equipment.

评论

发表评论

此博客中的热门博文

How does a CNC machining center ensure precision for mass-produced products?

Precision is one of the most important indicators to evaluate the processing performance of a CNC machining center . The processing precision and processing errors have a great impact on the quality of the processed parts. How can a CNC machining center ensure the precision of mass-produced products? The most commonly used processing method in the CNC machining industry is the trial cutting method. The trial cutting method is to try cutting, measure the size, adjust the cutting depth of the tool, cut again, and repeat the process until the required size is achieved. This method can ensure that the error is within a reasonable control range, but it is quite cumbersome and has a low production efficiency. It is mainly used for single-piece and small batch production. In mass automated production, CNC machining centers can achieve the required size by adjusting the relative positions of the machine tool, fixture, workpiece, and cutting tool in advance, thus achieving the goal of ensuring
阅读全文

How to deal with the plastic injection molding raw material is not filled?

图片
Electric injection molding machine in the production of injection mold will encounter the situation of injection molding is not filled, there is a lack of glue at the bone position right Angle and fuse connection, here to share some experience. Analysis of glue injection is not filled: 1. The trapped air in the bone position makes the injection molding machine fill up. 2. The filling of the injection molding machine caused by the glue welding line is not filled. Reason analysis of glue injection is not filled: When the injection molding machine is working, the mold gluing method is two-point gluing, and the injection speed is too fast, which is easy to cause the gas trapped at the right Angle of the bone position and cause the filling dissatisfaction; If the injection speed is too slow, it is easy to fill the fuse at the end of the flow. The solution: Multistage injection molding and position switching. In the first stage, the medium speed filling channel was used to pass
阅读全文

Control of Injection Molding Parts Processing Temperature

图片
There are many kinds of plastic, many plastic materials melting time are different, because the plastic does not have a specific melting point, the so-called melting point is a melting state of the temperature segment, the structure and composition of the plastic molecular chain is different, so the impact on its fluidity is also different, then in the production of injection parts manufacturers in the injection parts processing temperature control is also very important. 1. Mold temperature Some plastic materials due to high crystallization temperature, slow crystallization speed, need higher mold temperature, some due to control size and deformation, or the need for demoulding, to higher temperature or lower temperature, such as PC generally requires more than 60 degrees, and PPS in order to achieve a better appearance and improve fluidity, mold temperature sometimes needs more than 160 degrees, Therefore, the mold temperature has an inestimable effect on improving the appearanc
阅读全文